12V/24V, 20A Solar Charge Controller for LiFePO4 Batteries (SC-122420JUD)
Bioenno Power 12V/24V, 20A Solar Charge Controller (Model SC-122420JUD) is a versatile controller for use in solar systems with an integrated LCD display, that is designed to charge LiFePO4 (Lithium Iron Phosphate) batteries (and AGM/SLA batteries)! This solar controller accepts either 12V/24V input from solar panels and can handle up to 20 Amps. Featuring our proprietary CC/CV (Constant Current/Constant Voltage) circuitry, the solar controller provides a regulated voltage output for charging 12V or 24V LiFePO4 (and AGM/SLA batteries). The solar controller also provides a regulated 12V or 24V output for electrical loads (depending on whether a 12V or 24V battery is used). Solar controllers are required for all solar systems in order to maintain a regulated output voltage to charge batteries and for maintaining a regulating output voltage for loads.
Please note that for any solar setup in which you are using a panel in conjunction with a battery and/or a load a solar charge controller is absolutely necessary. DO NOT plug a panel directly into your battery or your load!
This controller does not boost voltage from the solar panel, but instead will regulate a high panel voltage from 50V downwards.
Specifications
System Voltage: 12V or 24V (automatic detection)
Allowable Range for Input Voltage (from solar panels): 12V to 50V (when using 12V or 24V LiFePO4 Batteries / AGM and SLA batteries)
Output Voltage to LiFePO4 Batteries (and AGM/SLA batteries): 12V or 24V
Output Voltage to Loads: 12V or 24V (depending on battery configuration)
Rated Charge Current (Current Delivered to Battery): Up to 20A
Rated Load Current: Up to 20A
Batteries Compatible w/ Controller: Lithium Iron Phosphate (LiFePO4)
Operating Temperature Range of the Controller: -31 F to 131 F (-30 C to 50 C)
Compatible 12V Lithium Iron Phosphate Batteries
Nominal Voltage: 12.8V
Float Voltage: 14.4V
Low Voltage Disconnect (LVD): 10.4V
Low Voltage Recovery (LVR): 11.16V
Automated Charge Settings -- the controller detects the battery to charge:
“b01: 14.2V”
“b02: 14.4V”
“b03: 14.6V”
"b04: 14.6V" - Default for LiFePo4
High Voltage Disconnect (HVD): 15.5V
Compatible 24V Lithium Iron Phosphate Batteries
Nominal Voltage: 25.6V
Float Voltage: 28.8V
Low Voltage Disconnect (LVD): 20.8V
Low Voltage Recovery (LVR): 23.2V
Boost Voltage:
“b01: 28.8V”
“b02: 28.4V”
“b03: 29.2V”
High Voltage Disconnect (HVD): 31.0V
No Load Loss: <13 mA
USB Port: 5VDC/1A
Charging Mode: CC/CV (constant current / constant voltage)
Dimensions: 6.5 in. x 3.46 in. x 1.5 in.(166 mm x 88 mm x 38 mm)
Weight: 0.59 lbs. (0.27 kg)
Related Products
Yaesu USB FTDI Radio Programming Cable VX-6, VX-7, VX-170
Aftermarket Programming Cable FTDI USB chipset TX and RX Led indicators Cable Length: 1M (3..
$26.99
West Mountain Radio Epic PWRgate 12V Backup Power System
PWRgate is a 12 volt backup power system rated at 40 amperes continuous from either a Power Suppl..
$189.99
Powerwerx MPPT-150-14.6, DC-to-DC Solar Charger Controller for Bioenno 12V LiFePO4 Batteries
Rated at 150 watts, the MPPT-150-14.6 solar controller is designed for charging Bioenno 12V type Lif..
$31.99
Powerwerx MPPT-300-14.6, DC-to-DC Solar Charger Controller for Bioenno 12V LiFePO4 Batteries
Rated at 300 watts, the MPPT-300-14.6 solar controller is designed for charging Bioenno 12V type Lif..
$41.99
Bioenno Power BPC-1503CAR 14.6V, 3A Car Charger for 12V LiFePO4 Batteries
Bioenno Power offers a 14.6VDC, 3A Car Charger for LiFePO4 batteries, Model BPC-1503CAR with both a ..
$99.99
Powerwerx PanelHDSW Heavy Duty 100A Panel Mount ON-OFF Battery Switch
Features Ultra Compact Battery Disconnect, easy to Install Selectable Battery (ON/OFF) D..
$28.99
Tags: solar, sc-122420jud, 857329003850, bioenno, power