- Aftermarket Programming Cable
- FTDI USB chipset
- TX and RX Led indicators
- Cable Length: 5 feet
- No programming software included
Aftermarket FTDI USB programming cable for use with the following Motorola Mobile and Portable Radios:Motorola handheld radios (2.5mm Male plug):
CP100, CP140, CP150, CP160, CP180, CP200, CP150, CT150, CT250, CT450, CT450-LS, GP2000, GP2100, GP3688, CP040 PRO2150, PRO3150, PR400, P040, P080, GP68, GP88S, EP450, CBPRO, and VL13. Motorola handheld radios (3.5mm Male plug):
AP73, GP63, GP68, GP68 Plus, GP68-8, Pacer, and Spirit. RJ45 to Mobile Radio:
CDM1250, CDM1550, CDM1550LS, CDM1550LS+, CDM750, CM140, CM160, CM200, CM300, CM340, CM360, Desktrac, EM200, EM400, GM1280, GM140, GM160, GM300, GM3188, GM338, GM340, GM340, GM360, GM3688, GM380, GM640, GM660, GR1225, GR300, GR400, GR500, GTX Mobile, LCS2000, M10, M100, M120, M1225, M1225LS, M130, M200, M208, M216, M400, Maratrac, Maxtrac, MCX760, MCX780, PM400, PRO3100, PRO5100, PRO7100, R1225, Radius Mobile, SM120, SM50, and Sportbase. Will not program mobile radios with remote head accessory installed. HT750 Type Multi-pin Adapter to Radio:
HT750, HT1250, HT1550, GP318, GP320, GP328, GP338, GP340, GP360, GP380, GP640, GP1280, PRO7150, PRO9150, and PRO5150. EX500 Type Multi-Pin Adapter to Radio:
EX600, EX500, EX600XLS, GP328Plus, GP338Plus, GP344, GP388, GP644, GP688, GL2000, PRO5150 elite, and PRO5151 Elite.
This device requires an FTDI USB VCP Driver. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.
FTDI Website: Installation Instructions and Driver Software